FAQ's Piggl BIKE SLIDE

Piggl BIKE SLIDE is designed to fit inside all SWB or LWB T5 and T6 Volkswagen Transporter vans (including T5.1 and T6.1) and is installed between the two rear wheel arches using the four exposed, existing floor mounting points in the van's floor. You will need to locate and expose the four mounting points circled in red below (which may be under your van's sub-floor), and remove the factory fitted lashing rings prior to installation.

Piggl BIKE SLIDE must be fitted onto a solid, flat floor - not the bare metal ribs of the floor as this will cause the furniture frame to bend and be unsupported. 

Included with Piggl BIKE SLIDE are all the bolts and fixings needed to securely build and install the unit to your van's floor. The frame can be unbolted, and the entire unit can be removed from your van if required, but we don't recommend doing this often as you will weaken the screw fixings in the wood. 

KOMBI SEATS: Piggl BIKE SLIDE cannot be fitted into a SWB or LWB Transporter with Kombi seats in place as it is too long. You need to remove the Kombi seats to use Piggl BIKE SLIDE. 

VW SHUTTLE: Piggl BIKE SLIDE is not designed to fit into a VW Shuttle as the interior panels may interfere with the fit of the unit. If you want to fit Piggl BIKE SLIDE into a VW Shuttle, then you will need to remove all seats, and have the skills and be prepared to cut into or remove the wall panels, some of the floor and the rear tailgate panel as these will prevent the furniture from being fitted. Piggl cannot accept responsibility for any parts broken or damaged in fitting Piggl BIKE SLIDE into a VW Shuttle and the responsibility lies soley with the buyer as Piggl BIKE SLIDE has not been designed for this purpose. 

We know that many of you want to sleep inside your Transporters whilst keeping your mountain bikes safely out of sight and secure with you on overnight stays.

In its closed position, Piggl BIKE SLIDE is a flat 2005 x 1200mm platform that can be used as a double bed, or you can attach fork mounts to fit your bike(s) onto one side of the platform, whilst sleeping alongside them on the other side on a single mattress - the choice is yours.

For a double bed, we suggest adding an inflatable mattress which you can find in the accessories section of our website here ↠

NOTE: Piggl BIKE SLIDE cannot be used to stand or sleep on whilst extended out of the tailgate of your Transporter. 

To make placing an order for your Piggl BIKE SLIDE as easy as possible we have four payment options:

1. Pay in Full. Once your order is ready to be dispatched we will contact you directly to discuss a suitable pallet delivery date for you.

2. Pay Deposit (Non-refundable. Balance payable prior to dispatch).

3. Pay Balance (Payable prior to dispatch).

4. Pay in Full+ Install in Chester. For a small additional charge we will assemble your Piggl BIKE SLIDE and have it ready for you to collect from us in Chester in your prepared Transporter.

Install is available from us in Chester (CH3) only. We will contact you to agree a suitable date and time. Install requires you to have prepared your Transporter with a solid floor and exposed floor mounting points ready for us to install your ready-built Piggl BIKE SLIDE.

By placing an order you are confirming that you have read and understood our Terms & Conditions, how Piggl BIKE SLIDE works, that it will be provided as a flat-pack product for you to assemble and install and that you have read and understood what items and fixings are or are not included as standard.

Delivery is only Monday - Friday. We cannot deliver at weekends or bank holidays.

Please allow approximately 2-3 weeks for the processing, manufacture, packing and delivery of Piggl BIKE SLIDE. We will notify you when your order is ready to dispatch to arrange a suitable delivery date. Delivery will be made on a pallet and customers are responsible to have someone at the delivery address and adequate space to accept the delivery. 

NOTE: The pair of sliding runners for the top platform will be delivered to you separately, direct from our supplier, as they are too large to fit onto the pallet with the rest of your delivery. We cannot guarantee that delivery will be on the same day as your pallet (although we will try our best to co-ordinate it if we can). You will need to be available to accept the delivery and they will require 2 adults to move them as they are very heavy.

All deliveries are of flat-pack and require self-assembly.

Delivery is only Monday - Friday. We cannot deliver at weekends or bank holidays.